|
SECTION 20: OPTIONAL LADDER ANCHOR KIT
THE LADDER ANCHOR KIT WILL ENABLE YOU TO SUPPORT THE INSIDE STAINLESS
STEEL LADDER WITHOUT POURING A CONCRETE DECK OR A CONCRETE BLOCK TO HOLD
THE FLANGES IN PLACE. ASSEMBLE THE PIECES AS SHOWN IN FIGURE 33. THE SUPPORTS
CAN BE ANCHORED TO THE BOTTOM OF EITHER AN END CHANNEL OR 'J* SECTION. BOLT
THE ANCHOR SOCKETS TO THE CROSSPIECE USING 3/8-16 x 1" S.S. BOLTS, 3/8-16 S.S. NUTS,
AND DOUBLE WASHERS. THE LADDER ANCHOR KIT MUST BE INSTALLED PRIOR TO
POURING THE CONCRETE FOOTING AT THE BASE OF THE WALL PANELS.
|
