|
SECTION 2: TOOLS AND MATERIALS
BELOW IS A LIST OF TOOLS AND MATERIALS NECESSARY FOR THE PROPER
INSTALLATION OF THE EMERALD INGROUND SWIMMING POOL.
TOOLS:
BACKHOE OR GRADALL TO DIG EXCAVATION MASONS LINE
SHOVELS, POINTED LONG HANDLED LANDSCAPE RAKE
GARDEN HOSE AND SPRAY NOZZLE PIPE WRENCHES
50' STEEL TAPE MEASURE PICK
12' STEEL TAPE MEASURE GARDEN RAKE
PUSH BROOM WITH SOFT BRISTLES TRANSIT
CONTRACTOR'S WHEELBARROW MORTAR HOE
2 RATCHET SETS, SOCKETS TO 3/4" GRADE STAKES
2 BOX WRENCHES 1/2" AND 9/16" HAND SAW
2 OPEN WRENCHES 1/2" AND 9/16" 2 DRIFT PINS
ELECTRIC DRILL WITH BITS TAMPERS
SCREWDRIVERS, LONG HANDLED 1 RUBBER MALLET
COMMERCIAL VACUUM CLEANER EXTENSION CORD
STEEL FINISHING TROWELS HACKSAW
2 LB. HAMMER
MATERIALS:
ROLL OF 2" DUCT TAPE * MASON'S OR BAR SAND:
LEVELING BLOCKS 2" x 8" x 16" * 12' x 20' APPROX. 3 YARDS
LIME
* 12' x 24' APPROX. 31/2 YARDS
TEFLON JOINT TAPE * 14' x 28' APPROX. 5 YARDS
WT. DRY 2700#/ CU. YD. * 16' x 32' APPROX. 8 YARDS
WT. WET 3375#/ CU. YD. * 18' x 36' APPROX. 9 YARDS
1" x3" LUMBER TO FRAME HOPPER *20'x40'APPROX. 10YARDS
*24' x 48' APPROX. 14 l/2 YARDS
CONCRETE:
THE PROPER AMOUNT IS DETERMINED ON FIGURE 16 FOR VARIOUS POOLS.
FOR SAND BASE ONLY.
|
