TABLE OF CONTENTS

SECTION:

1. PLANNING

2. TOOLS AND MATERIALS

3. SITE LAYOUT

4. EXCAVATION

5. WALL ASSEMBLY

6. SUPPORTS

7. INSTALLING WALL FITTINGS

8. HOPPER GRADING

8A. AGGREGATE BOTTOM

8B. SAND BASE

9. BACKFILL

10. LINER INSTALLATION

11. FIBER OPTIC BULLNOSE INSTALLATION

12. FITTING FACE PLATES

13. FILTER AND PLUMBING

14. ELECTRICAL INSTALLATION

15. LADDER AND BOARD INSTALLATION

16. OPTIONAL POOL HEATER

17. OPTIONAL FIBERGLASS STEPS

18. OPTIONAL MAIN DRAIN

19. CONCRETE DECK PACKAGE (OPTIONAL)

20. OPTIONAL LADDER ANCHOR KIT

SECTION 7: WALL FITTING INSTALLATION

STEP 1: INSTALL THE SKIMMER AND RETURN FITTNGS TO THE POOL WALL. ONE OF THE GASKETS SUPPLIED WITH THE SKIMMER IS PLACED BETWEEN THE SKIMMER BODY AND THE POOL WALL. THE SKIMMER BODY IS THEN ATTACHED TO THE POOL WALL USING THE TWO (2) PAN HEAD SCREWS SUPPLIED IN THE SKIMMER BOX. SEE FIGURE 17. THE RETURN FITTING IS INSTALLED IN ACCORDANCE WITH FIGURE 17.